Sleeve Variation

Some Variation of sleeve and how to make them.
1. Flare Sleeve
    There are 2 ways of making this sleeve
     the first method is slashing and spreading. First you make a basic sleeve. (look at the basic sleeve
     block post) http://silverdustjournal.blogspot.sg/2013/04/how-to-make-basic-sleeve.html
     Like the picture shown bellow, the red line is where you slash the sleeve. After Slashing, just spread the bottom part of the sleeve.

  

The second method is to draw a flare on the bottom and raise the edges.

2. Cap Sleeve
     - First meassure 8 cm down from the center line of the sleeve and mark the point.
     - Then draw the bottom of the sleeve just like the sleeve's head.
     - Lower the edges of the sleeve by 2,5cm .
     - then just meassure how long you wnat the cap sleeve to be and just true and bled the pattern.

3. Puff Sleeve
    A. is puffed at the bottom,basicly the first method for every puff is the same. as you can see on the picture bellow, the red line is where you slash the sleeve.
 For the first one (a.) it is slash and spread at the bottom
    B. slash and spread evenly (horizontaly)
    C. Slash and spread at the top

 

This are how the puff sleeves will look when its done.