Stand collar

A. Stand Collar

• First make a horizontal and vertical line. then measure the Shoulder size and from the shoulder to the CF (Center Front).
• Shoulder measurement is 8 and from shoulder to CF is 13cm.
• The width of the collar is 4cm. So mark 4cm on the vertical line.
• on th CF raise about 2 cm and make a curve from the shoulder to the point that have been raised. extend the line 2cm. Then make a straight line on the CF point and the extended point.
• Then draw a line for the upper part of the collar. and make a curve for the edge of the CF using a french curve.

B. Mandarin Collar

•  First step is the same as the stand collar. shoulder and the measurement from shoulder to the CF are also the same.
• Raise the CF about 1,5cm, and make a curve from the shoulder point to the CF. extend the line about 1,5cm and don't forget to draw the straight 90 degre angle line at the CF and the extended point.
• Draw the upper part of the collar, and make a round curve for the edge of the collar using the french curve. 

 C. Two Piece Shirt Collar 
      Shirt collar consist of two part, the collar stand and the collar. First we will do the collar stand.
    
      1. Collar Stand

• Do the same first step.
• Raise the CF about 1,5cm. Then make the curve from shoulder to the CF and extend 1,5cm. Make the 90 degre angle straight line 3cm long.
• Mark 3cm up on the vertical line. Then draw the upper part of the collar stand.
• Make a curve edge on the collar stand, the curve strated from the CF to the extended part. 

       2. Collar

• Do the same first step. Match the measurement to the stand collar.
• Raise 2cm on the cross of vertical and horizontal line, and make a curve from the shoulder point to the CF.
• Raise another 4 cm, and make a straiht line and extend 5cm from the CF.
• Join the extended part to the CF on the lower part.